Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
sending event email
#1
using delphi 10 seattle,
my email is setup like so:
Code:
      dmEmail.emMessage.ContentType := 'text/calendar;method=REQUEST';
      with tIDText.Create(dmEMail.emMessage.Messageparts) do
      begin
         ContentType := 'text/calendar;method=REQUEST';
//         parentPart := 0;
         Body.Text := eventText.Text;
      end;
      with TIdAttachmentFile.Create(dmEmail.emMessage.MessageParts, fName) do
      begin
         ContentDisposition := 'attachment';
         ContentType := 'text/calendar;method=REQUEST';
         ExtraHeaders.Values['Content-ID'] := ExtractFileName(fName);
         ContentID := ExtractFileName(fName);
         Filename := ExtractFilename(fName);
//           parentPart := 1;
      end
where fName is a .ics file that I am attempting to send.
currently, the contents of the ics file is:
Code:
BEGIN:VCALENDAR
VERSION:2.0
METHOD:REQUEST
BEGIN:VEVENT
ORGANIZER;CN=Connie M.:MAILTO:[real code has a valid email address here]
DTSTART:20190827T220000Z
DTEND:20190827T230000Z
TRANSP:OPAQUE
SEQUENCE:0
UID:185
DTSTAMP:20190827T071800Z
DESCRIPTION:3 pm my time
SUMMARY:Event on 27th
PRIORITY:2
BEGIN:VALARM
TRIGGER:-PT15M
ACTION:DISPLAY
DESCRIPTION:Reminder
END:VALARM
END:VEVENT
END:VCALENDAR

my mail.txt (saving the message to file) is this:

Code:
Subject: Event on 27th
To: [real code has a valid email address here, which is different that the organizer address above]
Content-Type: text/calendar; method=REQUEST; charset=us-ascii; boundary="AZF7QdS9INFRk=_YwrBAXh6TL7aANRhj0D"
MIME-Version: 1.0
Date: Tue, 27 Aug 2019 07:18:42 -0700

This is a multi-part message in MIME format

--AZF7QdS9INFRk=_YwrBAXh6TL7aANRhj0D
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline



--AZF7QdS9INFRk=_YwrBAXh6TL7aANRhj0D
Content-Type: text/calendar;method=REQUEST
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

BEGIN:VCALENDAR
VERSION:2.0
METHOD:REQUEST
BEGIN:VEVENT
ORGANIZER;CN=3DConnie M.:MAILTO:[weird that organizer name changed to start with 3D, but otherwise, same valie email address]
DTSTART:20190827T220000Z
DTEND:20190827T230000Z
TRANSP:OPAQUE
SEQUENCE:0
UID:185
DTSTAMP:20190827T071800Z
DESCRIPTION:3 pm my time
SUMMARY:Event on 27th
PRIORITY:2
BEGIN:VALARM
TRIGGER:-PT15M
ACTION:DISPLAY
DESCRIPTION:Reminder
END:VALARM
END:VEVENT
END:VCALENDAR

--AZF7QdS9INFRk=_YwrBAXh6TL7aANRhj0D
Content-Type: text/calendar;method=REQUEST;
    name="Event185.ics"
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
    filename="Event185.ics"
Content-ID: Event185.ics
Content-ID: Event185.ics

QkVHSU46VkNBTEVOREFSDQpWRVJTSU9OOjIuMA0KTUVUSE9EOlJFUVVFU1QNCkJFR0lOOlZFVkVO
VA0KT1JHQU5JWkVSO0NOPUNvbm5pZSBNLjpNQUlMVE86Q29ubmllbUBwcm92YW50YWdlc29mdHdh
cmUuY29tDQpEVFNUQVJUOjIwMTkwODI3VDIyMDAwMFoNCkRURU5EOjIwMTkwODI3VDIzMDAwMFoN
ClRSQU5TUDpPUEFRVUUNClNFUVVFTkNFOjANClVJRDoxODUNCkRUU1RBTVA6MjAxOTA4MjdUMDcx
ODAwWg0KREVTQ1JJUFRJT046MyBwbSBteSB0aW1lDQpTVU1NQVJZOkV2ZW50IG9uIDI3dGgNClBS
SU9SSVRZOjINCkJFR0lOOlZBTEFSTQ0KVFJJR0dFUjotUFQxNU0NCkFDVElPTjpESVNQTEFZDQpE
RVNDUklQVElPTjpSZW1pbmRlcg0KRU5EOlZBTEFSTQ0KRU5EOlZFVkVOVA0KRU5EOlZDQUxFTkRB
Ug0K

--AZF7QdS9INFRk=_YwrBAXh6TL7aANRhj0D--

.

what I am getting in return :

 raised exception class EIdSMTPReplyError with message 'STOREDRV.submission.excetption : invalid recipentsException;
failed to process message due to a permanent exception with mesage.  Amessage can't be sent because it contains no recipients.  InvalidRecipientsException a message can't be sent because it contains no recipients. 


since I DO have a recipient, I'm not sure why I am getting this message.

what I am trying to do :
send an email with an event invite, with the 'accept/decline' stuff in the email.

so far, the most I have accomplished is only getting the ics file as an attachment.

it is VERY possible the ics file is incorrect (this is my first time attempting this)
any ideas what I am missing?
Reply
#2
(08-27-2019, 02:33 PM)ccMcBride Wrote:
Code:
dmEmail.emMessage.ContentType := 'text/calendar;method=REQUEST';

That is the wrong ContentType value to use at the top level of the email when multiple parts are used in the TIdMessage.MessageParts collection.  It MUST be set to a 'multipart/...' media type instead, in this case 'multipart/mixed' since you have an standalone attachment that is not referred to by the text parts.

(08-27-2019, 02:33 PM)ccMcBride Wrote: my mail.txt (saving the message to file) is this:

Which is completely messed up, because you are not setting up the TIdMessage correctly, not even close.

(08-27-2019, 02:33 PM)ccMcBride Wrote: ORGANIZER;CN=3DConnie M.:MAILTO:[weird that organizer name changed to start with 3D, but otherwise, same valie email address]

That is just part of how the Quoted-Printable encoding works.  '=' is a reserved character in QP, so it has to be escaped in hexadecimal format (the ASCII code for the '=' character is decimal 61, hex 0x3D). 'quoted-printable' is the default encoding for TIdText parts, whereas 'base64' is the default for TIdattachment....

(08-27-2019, 02:33 PM)ccMcBride Wrote: what I am getting in return :

 raised exception class EIdSMTPReplyError with message 'STOREDRV.submission.excetption : invalid recipentsException;
failed to process message due to a permanent exception with mesage.  Amessage can't be sent because it contains no recipients.  InvalidRecipientsException a message can't be sent because it contains no recipients. 

since I DO have a recipient, I'm not sure why I am getting this message.

You did not show the code that populates the recipient(s).  But the email you did show has no 'From' header in it.  Maybe that is what the server is actually complaining about? Hard to say since you did not show the actual SMTP commands being sent.

(08-27-2019, 02:33 PM)ccMcBride Wrote: any ideas what I am missing?

Per https://stackoverflow.com/a/19535685/65863, try something more like this instead when populating the TIdMessage:

Code:
dmEmail.emMessage.From.Address := ...;
dmEmail.emMessage.Recipients.EMailAddresses := ...;
...
dmEmail.emMessage.ContentType := 'multipart/mixed';
with TIdText.Create(dmEMail.emMessage.MessageParts) do
begin
  ContentType := 'multipart/alternative';
  //ParentPart := -1;
end;
with TIdText.Create(dmEMail.emMessage.MessageParts) do
begin
  ContentType := 'text/plain';
  Body.Text := 'some plain text here to describe the event for email readers that don't support iCalendar';
  ParentPart := 0;
end;
with TIdText.Create(dmEMail.emMessage.MessageParts) do
begin
  ContentType := 'text/calendar;method=REQUEST';
  Body.LoadFromFile(fName);
  ParentPart := 0;
end;
with TIdAttachmentFile.Create(dmEmail.emMessage.MessageParts, fName) do
begin
  ContentDisposition := 'attachment';
  ContentType := 'text/calendar;method=REQUEST';
  ContentID := ExtractFileName(fName);
  Filename := ExtractFilename(fName);
  //ParentPart := -1;
end;

Reply
#3
my smtp settings (this works with all other emails)
Code:
      SMTP.Host := cdsDefaultSettings.FieldByName('SERVERNAME').AsString;
      SMTP.Username := cdsDefaultSettings.FieldByName('USERNAME').AsString;
      if cdsDefaultSettings.FieldByName('Enable_ssl').AsBoolean then
      begin
         SMTP.AuthType := satDefault;
         SMTP.Password := DecryptStr(cdsDefaultSettingsACCOUNT_ID.AsInteger);
      end
      else
         SMTP.AuthType := satNone;
      if (not IsNullStr(cdsDefaultSettings.FieldByName('PORT').AsString)) and
         (cdsDefaultSettings.FieldByName('PORT').AsInteger <> 0) then
         SMTP.Port := cdsDefaultSettings.FieldByName('PORT').AsInteger
      else
         SMTP.Port := 25;
      if cdsDefaultSettings.FieldByName('flags').AsInteger <> 0 then
      begin
         IOHandler.Host := SMTP.host;
         IOHandler.Port := SMTP.Port;
         if cdsDefaultSettings.FieldByName('flags').AsInteger = 4 then
            ioHandler.sslOptions.method := sslvTLSv1_2
         else
            ioHandler.SSLOptions.Method := TIDSSLVersion(cdsDefaultSettings.FieldByName('flags').AsInteger - 1);
         SMTP.IOHandler := ioHandler;
         if cdsDefaultSettings.FieldbyName('flags').AsInteger = 4 then
            SMTP.UseTLS := utUseExplicitTLS;
      end
      else
      begin
         SMTP.ioHandler := nil;
         SMTP.UseTLS := utNoTLSSupport;
      end;
//   end;


   emMessage.From.Address := cdsDefaultSettings.fieldByName('username').AsString;
   if not isNullStr(cdsDefaultSettings.fieldByname('display_name').AsString) then
      emMessage.From.Name := cdsDefaultSettings.FieldbyName('display_name').AsString
   else
      emMessage.From.Name := globalConnection.LoginRec.LoginName;
   if cdsuserEmail.IsEmpty then
      emMessage.ReplyTo.EMailAddresses := cdsDefaultSettings.fieldByName('username').AsString
   else
      emMessage.ReplyTo.EMailAddresses := cdsUserEmail.fieldByName('email_prime').AsString;
   emMessage.From.Address := emMessage.ReplyTo.EmailAddresses;


I changed the main message part to multipart/mixed, still error.
as test, I also did the following:
(1)
Code:
      dmEmail.emMessage.ContentType := 'text/calendar;method=PUBLISH';
      dmEmail.emmessage.Body.Text := eventText.Text;

//      with tIDText.Create(dmEMail.emMessage.Messageparts) do
//      begin
//         ContentType := 'text/calendar;method=PUBLISH';
//         Body.Text := eventText.Text;
//      end;
//      with TIdAttachmentFile.Create(dmEmail.emMessage.MessageParts, fName) do
//      begin
//         ContentDisposition := 'inline';
//         ContentType := 'text/calendar;method=REQUEST';
//         ExtraHeaders.Values['Content-ID'] := ExtractFileName(fName);
//         ContentID := ExtractFileName(fName);
//         Filename := ExtractFilename(fName);
////           parentPart := 1;
//      end
it was sent with no errors, the event was attached as an ICS file, no 'accept/decline' on email

mail.txt:
Code:
Subject: Meeting
To: Conniem@provantagesoftware.com
Content-Type: text/calendar; method=PUBLISH; charset=us-ascii; boundary="Z3x5XLdCh3=_gG99ZJaoS8M91yBNfYNSeh"
MIME-Version: 1.0
Date: Wed, 28 Aug 2019 07:19:40 -0700

BEGIN:VCALENDAR
PRODID:-www.provantagesoftware.com/v1.0/id=179
VERSION:2.0
METHOD:REQUEST
BEGIN:VEVENT
ORGANIZER;CN=Connie M.:MAILTO:Conniem@provantagesoftware.com
DTSTART:20190831T000000Z
DTEND:20190831T010000Z
TRANSP:OPAQUE
SEQUENCE:0
UID:179
DTSTAMP:20190828T071900Z
DESCRIPTION:Gun Range Location
SUMMARY:Meeting
PRIORITY:2
ATTENDEE;RSVP=TRUE:mailto:Conniem@provantagesoftware.com
END:VEVENT
END:VCALENDAR

--Z3x5XLdCh3=_gG99ZJaoS8M91yBNfYNSeh
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline



--Z3x5XLdCh3=_gG99ZJaoS8M91yBNfYNSeh--

.

(2)
Code:
      dmEmail.emMessage.ContentType := 'text/calendar;method=REQUEST';
      dmEmail.emmessage.Body.Text := eventText.Text;

blew up.
Mail.txt:
Code:
Subject: Meeting
To: Conniem@provantagesoftware.com
Content-Type: text/calendar; method=REQUEST; charset=us-ascii; boundary="Ei51sGtBwQfH=_1ikzmtp4ojmouS052Uh1"
MIME-Version: 1.0
Date: Wed, 28 Aug 2019 07:23:56 -0700

BEGIN:VCALENDAR
PRODID:-www.provantagesoftware.com/v1.0/id=179
VERSION:2.0
METHOD:REQUEST
BEGIN:VEVENT
ORGANIZER;CN=Connie M.:MAILTO:Conniem@provantagesoftware.com
DTSTART:20190831T000000Z
DTEND:20190831T010000Z
TRANSP:OPAQUE
SEQUENCE:0
UID:179
DTSTAMP:20190828T072300Z
DESCRIPTION:Gun Range Location
SUMMARY:Meeting
PRIORITY:2
ATTENDEE;RSVP=TRUE:mailto:Conniem@provantagesoftware.com
END:VEVENT
END:VCALENDAR

--Ei51sGtBwQfH=_1ikzmtp4ojmouS052Uh1
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline



--Ei51sGtBwQfH=_1ikzmtp4ojmouS052Uh1--
So, 'something' is missing specifically when I'm sending it with a request method.  just not sure what.

after more banging my head against my desk, I tracked this down to using outlook 365 as my email server.
if I use my gmail account for outgoing email, it works just fine (the email has the accept/tentative/decline buttons when sent to my outlook account).


any further ideas?
Reply
#4
(08-28-2019, 02:30 PM)ccMcBride Wrote: my smtp settings (this works with all other emails)

I see a few issues with that setup.

- Why are you setting a password only if SSL is used? Even if you don't use SSL to encrypt the connection, you can still login securely by using satSASL instead of atDefault, and then populating the TIdSMTP.SASLMechanism with secure SASLs like CRAM-SHA1, CRAM-MD5, etc.

- I don't suggest using the TIdSSLIOHandlerSocketOpenSSL.SSLOptions.Method property at all. You should be using the TIdSSLIOHandlerSocketOpenSSL.SSLOptions.SSLVersions property instead so that you can support multiple TLS versions at a time (ie TLS 1.0, 1.1, and 1.2). Not all servers support the latest TLS 1.2 yet, or are limited to a single version. And why is your assignment of SMTP.UseTLS dependent on whether you are using TLS 1.2 or not? Those are two independent settings, so you should be treating them separately in your config.

- you are populating emMessage.From from your config, and then you are overwriting it with emMessage.ReplyTo from a different config.

(08-28-2019, 02:30 PM)ccMcBride Wrote: I changed the main message part to multipart/mixed, still error.
as test, I also did the following:
...
it was sent with no errors, the event was attached as an ICS file, no 'accept/decline' on email
...

Your emails are still malformed. There are clearly multiple MIME parts present, despite your claim that the code logic for that is commented out. So clearly you have some left-over data in the TIdMessage, or you are not showing all of the code you are actually using to populate the TIdMessage. Either way, when multiple MIME parts are present, the top-level 'Content-Type' header MUST MUST MUST be a 'multipart/...' media type, like 'multipart/mixed'. So, either:

- populate ONLY the TIdMessage.Body and leave the TIdMessage.MessageParts empty, and set the TIdMessage.ContentType to 'text/calendar' accordingly.

- populate ONLY the TIdMessage.MessagePart and leave the TIdMessage.Body empty, and set the TIdMessage.ContentType to 'multipart/...' accordingly.

You should read my article on Indy's website about how multi-part emails actually work (it is geared towards HTML email, but much of it applies to this situation too. Just replace HTML with Calendar).

https://www.indyproject.org/2005/08/17/html-messages/

Also, the 'method' attribute in your 'Content-Type' header does not match the METHOD field in the calendar data. They need to match.

Reply
#5
(08-28-2019, 04:45 PM)rlebeau Wrote:
(08-28-2019, 02:30 PM)ccMcBride Wrote: my smtp settings (this works with all other emails)

>I see a few issues with that setup.

>- Why are you setting a password only if SSL is used?  Even if you don't use SSL to encrypt the connection, you can still login securely by using satSASL instead of ?>atDefault, and then populating the TIdSMTP.SASLMechanism with secure SASLs like CRAM-SHA1, CRAM-MD5, etc.

misnamed field name.  NOT my structure, but is the structure being used.
enable_ssl is actually 'use encryption' and
flags is actually the method of encryption (0 being none)


--updated settings:
Code:
      SMTP.Host := cdsDefaultSettings.FieldByName('SERVERNAME').AsString;
      SMTP.Username := cdsDefaultSettings.FieldByName('USERNAME').AsString;
      if cdsDefaultSettings.FieldByName('Enable_ssl').AsBoolean then
      begin
         SMTP.AuthType := satDefault;
         SMTP.Password := DecryptStr(cdsDefaultSettingsACCOUNT_ID.AsInteger);
      end
      else
         SMTP.AuthType := satNone;
      if (not IsNullStr(cdsDefaultSettings.FieldByName('PORT').AsString)) and
         (cdsDefaultSettings.FieldByName('PORT').AsInteger <> 0) then
         SMTP.Port := cdsDefaultSettings.FieldByName('PORT').AsInteger
      else
         SMTP.Port := 25;
      if cdsDefaultSettings.FieldByName('flags').AsInteger <> 0 then
      begin
         IOHandler.Host := SMTP.host;
         IOHandler.Port := SMTP.Port;
         if cdsDefaultSettings.FieldByName('flags').AsInteger = 4 then //tls
//         begin
            ioHandler.sslOptions.SSLVersions := [sslvTLSv1, sslvTLSv1_1, sslvTLSv1_2]
//            ioHandler.sslOptions.method := sslvTLSv1_2
         else
            ioHandler.sslOptions.SSLVersions := [sslvSSLv2, sslvSSLv23,sslvSSLv3];
//            ioHandler.SSLOptions.Method := TIDSSLVersion(cdsDefaultSettings.FieldByName('flags').AsInteger - 1);
         SMTP.IOHandler := ioHandler;
         if cdsDefaultSettings.FieldbyName('flags').AsInteger = 4 then
            SMTP.UseTLS := utUseExplicitTLS;
      end
      else
      begin
         SMTP.ioHandler := nil;
         SMTP.UseTLS := utNoTLSSupport;
      end;
//   end;
   emMessage.From.Address := cdsDefaultSettings.fieldByName('username').AsString;
   if not isNullStr(cdsDefaultSettings.fieldByname('display_name').AsString) then
      emMessage.From.Name := cdsDefaultSettings.FieldbyName('display_name').AsString
   else
      emMessage.From.Name := globalConnection.LoginRec.LoginName;
   if cdsuserEmail.IsEmpty then
      emMessage.ReplyTo.EMailAddresses := cdsDefaultSettings.fieldByName('username').AsString
   else
   begin
      emMessage.ReplyTo.EMailAddresses := cdsUserEmail.fieldByName('email_prime').AsString;
      emMessage.From.EMailAddress := cdsUserEmail.fieldByName('email_prime').AsString;
   end;
code for adding the ics:

Code:
procedure tdlgEMail.CreateAttachment(fName: String; IsRelated: Boolean = False; pPart: Integer = -1);
begin
   if isEvent then
   begin
      if isCancel then
      begin
         dmEmail.emMessage.ContentType := 'text/calendar; charset="utf-8";method=CANCEL';
         dmEmail.emmessage.Body.Text := eventText.Text;
      end
      else
      begin

         with tIDText.Create(dmEMail.emMessage.Messageparts) do
         begin
            ContentType := 'text/calendar;method=REQUEST';
            Body.Text := eventText.Text;
         end;
         with TIdAttachmentFile.Create(dmEmail.emMessage.MessageParts, fName) do
         begin
            ContentDisposition := 'inline';
            ContentType := 'text/calendar;method=REQUEST';
            ExtraHeaders.Values['Content-ID'] := ExtractFileName(fName);
            ContentID := ExtractFileName(fName);
            Filename := ExtractFilename(fName);
   //           parentPart := 1;
         end
      end;
   end
   else
   begin
      with TIdAttachmentFile.Create(dmEmail.emMessage.MessageParts, fName) do
      begin
         if IsRelated then
         begin
            ContentDisposition := 'inline';
            ContentType := 'image/jpeg';
            ExtraHeaders.Values['Content-ID'] := ExtractFileName(fName);
            ContentID := ExtractFileName(fName);
         end
         else
            ContentType := GetMIMETypeFromFile(fName);
         Filename := ExtractFilename(fName);
         ParentPart := pPart;
      end;
   end;

end;
mail.txt: (this one blows up when I use outlook365 as my SMTP email server)
Code:
Subject: test Event for Christophe
To: "Connie M." <conniem@provantagesoftware.com>
Content-Type: multipart/mixed; boundary="yzkm5fRQQXAs5=_A3wk7LhIPDANsDvtqFL"
MIME-Version: 1.0
Date: Wed, 28 Aug 2019 12:06:55 -0700

This is a multi-part message in MIME format

--yzkm5fRQQXAs5=_A3wk7LhIPDANsDvtqFL
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline



--yzkm5fRQQXAs5=_A3wk7LhIPDANsDvtqFL
Content-Type: text/calendar;method=REQUEST
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

BEGIN:VCALENDAR
PRODID:-www.provantagesoftware.com/v1.0/id=3D195
VERSION:2.0
METHOD:REQUEST
BEGIN:VEVENT
ORGANIZER;CN=3DConnie M.:mailto:conniem@provantagesoftware.com
DTSTART:20190830T230000Z
DTEND:20190831T000000Z
TRANSP:OPAQUE
SEQUENCE:0
UID:195
DTSTAMP:20190828T120600Z
DESCRIPTION:content type is actually set at the email level
SUMMARY:test Event for Christophe
PRIORITY:2
ATTENDEE;RSVP=3DTRUE:mailto:conniem@provantagesoftware.com
END:VEVENT
END:VCALENDAR

--yzkm5fRQQXAs5=_A3wk7LhIPDANsDvtqFL
Content-Type: text/calendar;method=REQUEST;
    name="Event195.ics"
Content-Transfer-Encoding: base64
Content-Disposition: inline;
    filename="Event195.ics"
Content-ID: Event195.ics
Content-ID: Event195.ics

QkVHSU46VkNBTEVOREFSDQpQUk9ESUQ6LXd3dy5wcm92YW50YWdlc29mdHdhcmUuY29tL3YxLjAv
aWQ9MTk1DQpWRVJTSU9OOjIuMA0KTUVUSE9EOlJFUVVFU1QNCkJFR0lOOlZFVkVOVA0KT1JHQU5J
WkVSO0NOPUNvbm5pZSBNLjptYWlsdG86Y29ubmllbUBwcm92YW50YWdlc29mdHdhcmUuY29tDQpE
VFNUQVJUOjIwMTkwODMwVDIzMDAwMFoNCkRURU5EOjIwMTkwODMxVDAwMDAwMFoNClRSQU5TUDpP
UEFRVUUNClNFUVVFTkNFOjANClVJRDoxOTUNCkRUU1RBTVA6MjAxOTA4MjhUMTIwNjAwWg0KREVT
Q1JJUFRJT046Y29udGVudCB0eXBlIGlzIGFjdHVhbGx5IHNldCBhdCB0aGUgZW1haWwgbGV2ZWwN
ClNVTU1BUlk6dGVzdCBFdmVudCBmb3IgQ2hyaXN0b3BoZQ0KUFJJT1JJVFk6Mg0KQVRURU5ERUU7
UlNWUD1UUlVFOm1haWx0bzpjb25uaWVtQHByb3ZhbnRhZ2Vzb2Z0d2FyZS5jb20NCkVORDpWRVZF
TlQNCkVORDpWQ0FMRU5EQVINCg==

--yzkm5fRQQXAs5=_A3wk7LhIPDANsDvtqFL--

.

THIS ics file (mail.txt), however DOES work when I send through outlook:
Code:
Subject: test Event for Christophe
To: "Connie M." <conniem@provantagesoftware.com>
Content-Type: multipart/mixed; boundary="bZwjjlg5Q6=_8VO7yTNgqlJxYXfxLw4syB"
MIME-Version: 1.0
Date: Wed, 28 Aug 2019 12:12:11 -0700

This is a multi-part message in MIME format

--bZwjjlg5Q6=_8VO7yTNgqlJxYXfxLw4syB
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline



--bZwjjlg5Q6=_8VO7yTNgqlJxYXfxLw4syB
Content-Type: text/calendar;method=REQUEST
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

BEGIN:VCALENDAR
PRODID:-www.provantagesoftware.com/v1.0/id=3D195
VERSION:2.0
METHOD:REQUEST
BEGIN:VEVENT
ORGANIZER;MAILTO:conniem@provantagesoftware.com
DTSTART:20190830T230000Z
DTEND:20190831T000000Z
TRANSP:OPAQUE
SEQUENCE:0
UID:195
DTSTAMP:20190828T121200Z
DESCRIPTION:content type is actually set at the email level
SUMMARY:test Event for Christophe
PRIORITY:2
ATTENDEE;RSVP=3DTRUE:mailto:conniem@provantagesoftware.com
END:VEVENT
END:VCALENDAR

--bZwjjlg5Q6=_8VO7yTNgqlJxYXfxLw4syB
Content-Type: text/calendar;method=REQUEST;
    name="Event195.ics"
Content-Transfer-Encoding: base64
Content-Disposition: inline;
    filename="Event195.ics"
Content-ID: Event195.ics
Content-ID: Event195.ics
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--bZwjjlg5Q6=_8VO7yTNgqlJxYXfxLw4syB--

.
and the only difference between the two is this line:
not working: (throws recipient error when sent through outlook smtp, but works when I use gmail smtp server)
ORGANIZER;CN=3DConnie M.:mailto:conniem@provantagesoftware.com

Works:
ORGANIZER;MAILTO:conniem@provantagesoftware.com

I have tried putting the CN part in quotes, and tried putting it in double quotes, but I still get the same error.
so, is the message still malformed?
Reply
#6
(08-28-2019, 07:16 PM)ccMcBride Wrote: misnamed field name. NOT my structure, but is the structure being used.
enable_ssl is actually 'use encryption' and
flags is actually the method of encryption (0 being none)

Still looks odd to me, but OK.

(08-28-2019, 07:16 PM)ccMcBride Wrote: code for adding the ics:

Where are you setting the TIdMessage.ContentType when using the TIdMessage.MessageParts?

Why are you setting the TIdAttachment.ContentDisposition to 'inline' instead of 'attachment'? And you are STILL setting the ExtraHeaders['Content-ID'] header when you shouldn't be.

(08-28-2019, 07:16 PM)ccMcBride Wrote: mail.txt: (this one blows up when I use outlook365 as my SMTP email server)

Define "blows up" exactly.

(08-28-2019, 07:16 PM)ccMcBride Wrote: and the only difference between the two is this line:
not working: (throws recipient error when sent through outlook smtp, but works when I use gmail smtp server)
ORGANIZER;CN=3DConnie M.:mailto:conniem@provantagesoftware.com

Works:
ORGANIZER;MAILTO:conniem@provantagesoftware.com

I have tried putting the CN part in quotes, and tried putting it in double quotes, but I still get the same error.

That difference is merely in the content of the "ORGANIZER" field, regardless of how that content is being transported via email. One email is using "CN=<name>:mailto:<email>" (ignore the changing of '=' characters to '=3D', that is just the Quoted-Printable encoding at play during transport - any MIME-compliant receiver will decode '=3D' back to '=' before processing the ICS data), whereas the other email is using "MAILTO:<email>" instead. That has absolutely nothing to do with Indy, and if the receiver can't handle the added "CN" value, that is not Indy's fault.

That being said, if you find that the receiver is simply not handling the Quoted-Printable encoding properly, you CAN disable it (though I would not recommend that) by setting the TIdText.ContentTransfer property to either '7bit', 'base64', '8bit', or 'binary' instead ('quoted-printable' is the default if left blank).

(08-28-2019, 07:16 PM)ccMcBride Wrote: so, is the message still malformed?

There is an extra 'text/plain' MIME part that is present in your emails that doesn't belong there (it should not be causing problems for iCalendar-aware receivers, though), but I don't see your code adding a TIdText for that text, and Indy should not be generating a blank text MIME part like that (if it is, that will have to be addressed).

Reply
#7
attached is a test project.
open dmEmail, go to setupsmtp, set your login creditials.  start the program, add an email address, click the 'send email' button.
using delphi seattle, indy v. 10.6.2.5311
Reply
#8
(08-29-2019, 03:12 PM)ccMcBride Wrote: attached is a test project.

There is no attachment present.

But even if there were, I would not be able to compile it anyway as I don't have a working compiler installed at the moment due to a system crash a few months ago. So while I can look at code and tell you if anything is out of place, you are going to have to do any actual debugging yourself.

Reply
#9
(08-30-2019, 01:39 AM)rlebeau Wrote:
(08-29-2019, 03:12 PM)ccMcBride Wrote: attached is a test project.

There is no attachment present.

But even if there were, I would not be able to compile it anyway as I don't have a working compiler installed at the moment due to a system crash a few months ago.  So while I can look at code and tell you if anything is out of place, you are going to have to do any actual debugging yourself.
sorry.  it is now attached.


Attached Files
.zip   Indytest.zip (Size: 797.74 KB / Downloads: 3)
Reply
#10
(08-30-2019, 03:00 PM)ccMcBride Wrote: sorry.  it is now attached.

Try this code instead:

Code:
unit dEmail;

interface

uses
  Vcl.Forms, System.SysUtils, Vcl.StdCtrls, Vcl.Buttons, Vcl.Controls, Vcl.ExtCtrls, Data.DB,
  Vcl.Dialogs, System.Classes, dbEmail;

type
  TdlgEmail = class(TForm)
    dlgOpen: TOpenDialog;
    reBody: TMemo;
    Panel1: TPanel;
    Label1: TLabel;
    mmAddresses: TMemo;
    Label2: TLabel;
    mmCarbon: TMemo;
    Label3: TLabel;
    mmBlindCarbon: TMemo;
    Label4: TLabel;
    edtSubject: TEdit;
    btnOK: TBitBtn;
    btnCancel: TBitBtn;
    procedure btnOKClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure FormCreate(Sender: TObject);
    procedure FormDestroy(Sender: TObject);
  private
    { Private declarations }
    function emailMessage : boolean;
    procedure CreatePDFEmail;
  public
    { Public declarations }
    eventText : TStringList;
  end;

var
  dlgEmail: TdlgEmail;

implementation

{$R *.dfm}

uses
  idException, idAttachmentFile, idGlobalProtocols, idText;

procedure TdlgEmail.btnOKClick(Sender: TObject);
begin
  if (mmAddresses.Lines.Count = 0) and
    (mmCarbon.Lines.Count = 0) and
    (mmBlindCarbon.Lines.Count = 0) then
  begin
    ShowMessage('Please enter a valid email address');
  end
  else if dmEmail.SetupSMTP then
  begin
    if EmailMessage then
      ModalResult := mrOK;
  end;
end;

procedure TdlgEmail.FormCreate(Sender: TObject);
begin
  dmEmail := TdmEmail.Create(Self);
  eventText := TStringList.Create;
  eventText.LoadFromFile('testEvent.ics');
end;

procedure TdlgEmail.FormDestroy(Sender: TObject);
begin
  eventText.Free;
end;

procedure TdlgEmail.FormShow(Sender: TObject);
begin
  mmAddresses.SetFocus;

  mmCarbon.SetFocus;
  mmCarbon.SelStart := 0;//scroll back to top of memo
  mmCarbon.SelLength := 0;

  mmBlindCarbon.SetFocus;
  mmBlindCarbon.SelStart := 0;//scroll back to top of memo
  mmBlindCarbon.SelLength := 0;

  mmAddresses.SetFocus;
  mmAddresses.SelStart := 0;//scroll back to top of memo
  mmAddresses.SelLength := 0;
end;

function tdlgEmail.EmailMessage: boolean;
var
  x : integer;
begin
  Result := false;
  if dmEmail.SetupSMTP then
  begin
    CreatePDFEmail;
    Result := dmEmail.DoMail;
  end;
end;

procedure TdlgEmail.CreatePDFEmail;
var
  AlternativePartIdx: Integer;
  //Stream: TStream;
begin
  // let's not get too fancy here with CreateAttachment(), let's get a single Calendar
  // email working properly first, then add on to the code logic later as needed ...
 
  dmEmail.emMessage.Clear;

  dmEmail.emMessage.Recipients.EMailAddresses := mmAddresses.Lines.CommaText;
  dmEmail.emMessage.CCList.EMailAddresses := mmCarbon.Lines.CommaText;
  dmEmail.emMessage.BccList.EMailAddresses := mmBlindCarbon.Lines.CommaText;
  dmEmail.emMessage.Subject := edtSubject.Text;
  dmEmail.emMessage.UseNowForDate := True;
  dmEmail.emMessage.ContentType := 'multipart/mixed';

  if reBody.Lines.Count > 0 then
  begin
    with TIdText.Create(dmEmail.emMessage.MessageParts, nil) do
    begin
      ContentType := 'multipart/alternative';
      AlternativePartIdx := Index;
    end;
    with TIdText.Create(dmEmail.emMessage.MessageParts, reBody.Lines) do
    begin
      ContentType := 'text/plain';
      ParentPart := AlternativePartIdx;
    end;
  end else
    AlternativePartIdx := -1;

  with TIdText.Create(dmEMail.emMessage.Messageparts, eventText) do
  begin
    ContentType := 'text/calendar;method=REQUEST';
    ParentPart := AlternativePartIdx;
  end;

  with TIdAttachmentFile.Create(dmEmail.emMessage.MessageParts, 'testEvent.ics') do
  begin
    ContentDisposition := 'attachment';
    ContentType := 'text/calendar;method=REQUEST';
    ParentPart := -1;
  end;

  { alternatively, since you already have the .ICS file loaded in memory, you could use this instead:

  Stream := TStringStream.Create(eventText.Text, TEncoding.UTF8);
  try
    with TIdAttachmentMemory.Create(dmEmail.emMessage.MessageParts, Stream) do
    begin
      ContentDisposition := 'attachment';
      ContentType := 'text/calendar;method=REQUEST';
      ParentPart := -1;
    end;
  finally
    Stream.Free;
  end;

  or this:
 
  with TIdAttachmentMemory.Create(dmEmail.emMessage.MessageParts) do
  begin
    ContentDisposition := 'attachment';
    ContentType := 'text/calendar;method=REQUEST';
    ParentPart := -1;
    Stream := PrepareTempStream;
try
      WriteStringToStream(Stream, eventText.Text, IndyTextEncoding_UTF8);
finally
      FinishTempStream;
    end;
  end;
  }

  dmEmail.emMessage.SaveToFile('mail.txt');
end;

end.

Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)